chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sensors and Switches - Lighting and Horns > < Park Brake Indicator Switch|Page 713
Page 1
background image

Parking Brake Warning Switch: Service and Repair

REMOVE OR DISCONNECT

1. The negative battery cable.
2. The left kick panel.
3. The electrical connector.
4. The retainer from the switch.
5. The parking brake indicator switch from the vehicle.

INSTALL OR CONNECT

1. The parking brake indicator switch to the vehicle.
2. The retainer to the switch.

^

Tighten the retaining screw to 4 Nm (35 inch lbs.).

3. The electrical connector.
4. The left kick panel.
5. The negative battery cable. 

Sensors and Switches - Lighting and Horns > < Park Brake Indicator Switch|Page 713