G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
28-MT Components
INSTALL OR CONNECT
1. Driveshaft support (33) to the driveshaft (31), seating the bearing (32) in the support.
2. Clutch drive assembly (34) to the driveshaft (31).
3. New pinion stop (36) and stop rings (35).
A. Slide the pinion stop (36) onto the driveshaft (31). End with the recess for the stop rings facing up.
B. Install the stop rings (35) into the groove in the driveshaft.
