G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
28-MT Components
If the motor does not perform to specifications, it may need to be disassembled for further testing of the components. Normally, the starter motor should
be disassembled only as far as necessary to make the repair or replacement of parts. The 28-MT components are shown in image.
Do not attempt to disassemble the following components that are serviced as assemblies:
^
Solenoid assembly (19).
^
Clutch drive assembly (34).
^
Brush holder assembly (7).
^
Armature assembly (13).
^
Frame and field assembly (15).
As a precaution, it is suggested that safety glasses be worn when disassembling or assembling the starter motor.
Unit Disassembly
