G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
Assemble
-
Lubricate O-ring seals (3 and 5) with power steering fluid.
1. O-ring seals (3 and 5) to housing (8).
2. Dowel pins (13) to housing (8).
3. Thrust plate (15) and pump rotor (16) to drive shaft (12) and secure with retaining ring (17).
4. Shaft, rotor and thrust plate assembly to housing (8).
5. Pump vanes (l8) to pump rotor (l6).
6. Pump ring (20) to housing (8) with identification arrows on top edge of ring (20) facing outward.
7. Pressure plate (2l).
8. Spring (22) and end plate (23).
9. Retaining ring (25).
10. Pump reservoir (37). Refer to "Pump Reservoir Replacement."
Install or Connect
-
Power steering pump. Refer to "Power Steering Pump Replacement."