G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
-
Notch in stub shaft cap must fully engage valve body pin and seat against valve body shoulder.
-
Install O-ring seals (45) and teflon rings (46) to valve body (43).
-
Lubricate O-ring seals (45) and teflon rings (46) with power steering fluid.
3. Stub shaft (40) and valve assembly to worm shaft (13), fitting pin on worm shaft (13) to slot in the valve assembly.
4. Adjuster plug. Refer to "Adjuster Plug Assembly Replacement."
Adjust
-
Thrust bearing preload and pitman shaft overcenter sector. Refer to "Steering Gear Adjustments."
Install or Connect
-
Steering gear. Refer to "Power Steering Gear Replacement."
Rack Piston and Worm Shaft Replacement
