G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
1. Place J 21370-10 in the servo bore.
2. Position J 38737 over the bore with the hex nut facing the parking pawl linkage.
3. Fasten with the two rear servo cover bolts
-
Tighten bolts to 24 Nm (18 ft. lbs.).
4. Ensure J 21370-10 moves freely in the tool and pin bore.
5. To determine the correct pin length, apply torque to the nut on the gage.
-
Tighten nut to 34 Nm (25 ft. lbs.).
