G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
Oil Pressure Sender: Service and Repair
Description
REMOVE OR DISCONNECT
1. The engine cover.
2. The air cleaner assembly.
3. The turbocharger intake cover from the turbocharger.
4. Cover the turbocharger intake opening.
5. The oil pressure sender from the engine block.
-
Kent-Moore does not offer a tool for this operation. The use of a 1 1/16 inch crowsfoot is a MUST for this procedure.
INSTALL OR CONNECT
1. The oil pressure sender to the engine block.
2. Remove the cover the turbocharger intake opening.
3. The turbocharger intake cover to the turbocharger.
4. The air cleaner assembly.
5. The engine cover.
