chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Vehicle - Engine Crankcase and Subsystems Flushing Info.|Page 2919 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 2913
Page 1
background image

Band: All Technical Service Bulletins
A/T - New 2-4 Band Apply, Anchor Brackets, Lube Window

Number:

90-121-7A

Section:

7A

Date:

December 1989

Corporate Bulletin No.: 977161
Subject:

2-4 BAND CHANGES-APPLY/ANCHOR BRACKETS AND NEW LUBE WINDOW

Model and Year:

1982-90 LIGHT DUTY TRUCKS WITH 4L60 (700-R4) AUTOMATIC TRANSMISSION

Figure 1 - 2-4 Band Assembly

Figure 2 - THM 700-R4/HYDRA-MATIC 4L60 Transmission Identification Information

TO:

ALL CHEVROLET DEALERS

This bulletin covers a new HYDRA-MATIC 4L60 transmission 2-4 band with changes to the apply and anchor brackets, locating tabs, and the addition
of a "lube window." The lube window was added to direct lubricating transmission fluid to the band friction material while the band is not applied.
Structural changes to the apply and anchor brackets increase their durability and the locating tabs were added to aid in assembly. (See Figure 1.)

Starting September 8, 1989 (Julian Date 251), all HYDRA-MATIC 4L60 transmissions were built using the new 2-4 band assembly. (See Figure 2.)

Vehicle - Engine Crankcase and Subsystems Flushing Info.|Page 2919 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 2913