G 30 1 Ton Van L6-250 4.1L VIN D 2-bbl (1983)
Clutch Pedal Assembly: Adjustments
Fig. 1 Clutch pedal free travel adjustment. G models
G MODELS
1.
Disconnect clutch fork return spring at fork.
2.
Loosen nut ``A,'' Fig. 1, and back off from swivel about 1/2 inch.
3.
Hold clutch fork pushrod against fork to move clutch release bearing against clutch fingers (pushrod will slide through swivel at cross-shaft).
4.
Adjust nut ``B'' to obtain 3/16 to 1/4 inch clearance between nut ``B'' and swivel.
5.
Release pushrod, connect return spring and tighten nut ``A'' to lock swivel against nut ``B.''
6.
Check free pedal travel which should be 1-1/4 to 1-1/2 inch.
