G 30 1 Ton Van L6-250 4.1L VIN D 2-bbl (1983)
Wiper Gear Box: Service and Repair
G MODELS
1.
Remove wiper arms from pivot shafts.
2.
Remove ventilator grille to cowl attaching screws, then the ventilator grille.
3.
Working from center of cowl, remove link rod to motor drive attaching nuts, then disconnect link rods from pins.
4.
Remove transmission pivot shaft assembly to cowl retaining screws.
5.
Remove transmission pivot shaft assembly with link rods through opening in plenum chamber.
6.
Reverse procedure to install.
