G 30 Van V8-393 6.5L DSL VIN P (1995)
Glow Plug Relay: Service and Repair
Glow Plug Relay
REMOVE OR DISCONNECT
1. Negative battery cables.
2. Wiring connector to the relay.
3. Relay mounting nuts.
4. Relay from the studs on the engine.
INSTALL OR CONNECT
1. Relay to the studs on the engine.
2. Relay mounting nuts.
Tighten
^
Nuts to 35 Nm (25 lb. ft.).
3. Wiring connector to the relay.
Tighten
^
Wiring harness nuts to 5 Nm (44 lb. in.).
4. Negative battery cables.
