G 30 Van V8-393 6.5L DSL VIN P (1995)
hardware will be reversed from the current hardware; i.e. the anchor plate will be located on the bottom side of the axle assembly, U-bolts facing
downward (Figure 1).
# 1: Current Configuration
# 2: New Configuration
SERVICE PROCEDURE
Reference Section 3D in the Service Manual for proper replacement procedures.
TORQUE
Torque nuts to 205 Nm (151 lb.ft.).
PARTS INFORMATION
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor
Operation
Description
Labor Time
E5227
Replace -
Use Published
U-Bolt or Retaining Bolt,
Labor Operation
Rear Leaf Spring
Time