G 30 Van V8-454 7.4L VIN J SFI (1996)
13. The 2-way electrical connector to the combination valve.
14. Four electrical connectors to the EBCM.
15. ABS shield.
16. Three 13mm ABS shield bolts.
Tighten
-
Three bolts to 12 Nm (8 lb. ft.).
17. Lower vehicle.
18. Negative battery cable.
19. Bleed the system.
Important
-
Verify that the combination valve metering rod is depressed during the bleeding.
20. Return to the Diagnostic System Check.