G 30 Van V8-454 7.4L VIN J SFI (1996)
Backup Lamp Switch: Service and Repair
Back-up light switch removal
AUTOMATIC TRANSMISSION
1. Disconnect battery ground cable and switch assembly harness.
2. Place gear selector in neutral, then squeeze tangs together and remove, Fig. 5.
3. Reverse procedure to install. Adjust switch by moving gear selector to park. The actuator will ratchet, providing proper adjustment.
MANUAL TRANSMISSION
1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Disconnect switch wiring harness, Fig. 5, then remove switch from transmission.
4. Reverse procedure to install, then check switch for proper operation.
