chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Handle|Service and Repair|Page 10497 > < Body - Polypropylene Energy Absorber Replacement
Page 1
background image

Front Door Handle: Service and Repair

Remove or Disconnect

^

Raise the window completely.

1. Door trim panel.
2. Door to outside handle screws (253).
3. Handle from the door.
4. Gaskets from the door.

Install or Connect

1. Large gasket onto the handle.
2. Door to outside handle screw (253) to the push button side of the handle.
^

Do not tighten.

3. Small gasket between the door and the handle.
4. Door to outside handle screw (253) to the other side of the handle.
^

Tighten both screws.

Front Door Handle|Service and Repair|Page 10497 > < Body - Polypropylene Energy Absorber Replacement