G 30 Van V8-454 7.4L VIN N TBI (1995)
Clutch Coil Assembly Removal
2. Install J 33023-A puller pilot on front head of compressor. Also install J 8433-1 puller crossbar with J 33025 puller legs as shown in the
illustration.
3. Tighten J 8433-3 forcing screw against the puller pilot to remove the clutch coil.
1. Place the clutch coil assembly on the front head with the terminals positioned at the "marked" location.
2. Place the J 33024 clutch coil installer over the internal opening of the clutch coil housing and align installer with the compressor front head.
Installing Clutch Coil Assembly
3. Center the J 8433-1 puller crossbar in the counter- sunk center hole of the J 33024 clutch coil installer. Install the J 3302-2 through bolts and
