chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/C - Insufficient Performance/Noisy Clutch|Page 9800 > < With V5 Compressor|Page 9791
Page 1
background image

Compressor Shaft Seal: Customer Interest
A/C - Insufficient Performance/Noisy Clutch

File In Section: 1 - HVAC

Bulletin No.: 63-12-16

Date: December, 1996

Subject: 
Insufficient A/C Performance and/or Noisy Compressor Clutch Assembly

Models: 
1994-95 Chevrolet Camaro
1994-95 Pontiac Firebird

1994-95 Chevrolet and GMC G/M/L Models

Condition

Some owners may comment on insufficient air conditioning performance and/or noisy compressor clutch assembly.

Cause

Premature wear of the compressor shaft seals. This wear will result in PAG oil leakage on the clutch drive and pulley, thus causing insufficient
engagement of the compressor.

Correction

Install new shaft seal kit, P/N 2724954 and clutch driver, P/N 6580590.

Procedure

1.

Recover refrigerant. Refer to "Refrigerant Recovery" in Section 1B of the Service Manual.

2.

Remove clutch driver plate and hub assembly as identified in Section 1D2 of the Service Manual.

3.

Before removing the compressor shaft seals, the clutch pulley rotor face must be lightly sanded with 100 grit emery cloth to remove any burnt oil
build up. Once the rotor face has been reconditioned, clean area thoroughly. If the clutch pulley rotor face is badly discolored and/or damaged,
replace compressor assembly.

4.

Remove compressor shaft seals as identified in Section 1D2 of the Service Manual.

5.

Install the new shaft seal kit, P/N 2724954, and clutch driver, P/N 6580590, using the installation procedures in Section 1D2 of the Service
Manual. This new seal kit will include oil wick pads and a shaft dust seal along with the typical compressor seals. Follow the detailed instructions
included in the service kit to identify proper seal usage and sequence of installation.

6.

Evacuate and re-charge the system as identified in Section 1B of the Service Manual.

7.

Check system for leaks. Refer to "Leak Testing" in Section 1B of the Service Manual.

Parts Information

P/N

Description

Quantity

2724954

Shaft Seal Kit,

1

Compressor

6580590

Clutch Driver,

1

Compressor             

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

A/C - Insufficient Performance/Noisy Clutch|Page 9800 > < With V5 Compressor|Page 9791