chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine - Drive Belt Misalignment Diagnostics|Page 1667 > < Engine - Drive Belt Misalignment Diagnostics|Page 1665
Page 1
background image

Drive Belt: Technical Service Bulletins
Power Steering Pump - Seal/Drive Belt Failure

FILE IN SECTION: 3 - Steering/Suspension

BULLETIN NO.: 57-32-01

DATE: June, 1995

SUBJECT:
Power Steering Pump Pulley Misalignment (Move Pulley Forward)

MODELS:
1995 Chevrolet G Models - VINs SF162199 thru SF170104 
1995 GMC Truck G Models - VINs SF524598 thru SF526478 
with 4.3L, 5.OL, 5.7L, 7.4L Engine (VINs Z, H, K, N - RPOs LB4, L03, L05, L19) 
and 4L60-E/4L80-E Transmission (RPOs M30, MT1)

CONDITION

Some owners of the vehicles involved may experience a power steering pump seal failure along with premature accessory drive belt noise and possible
failure.

CAUSE

The power steering pump pulley may be misaligned.

CORRECTION

In addition to the normal service for the above conditions, for vehicles within the above VIN ranges check to see that the pulley is flush with the power
steering pump shaft. If it is not, reference Section 3B-17 of the 1995 G Van Service Manual for further service instructions.

WARRANTY INFORMATION

For vehicles repaired under warranty, use: 

Labor Operation 

Labor Time

E8360 

(V6/V8) 0.9 hr

Engine - Drive Belt Misalignment Diagnostics|Page 1667 > < Engine - Drive Belt Misalignment Diagnostics|Page 1665