G 30 Van V8-454 7.4L VIN N TBI (1995)
General Information
^
The following general repair procedures can be used to repair most types of connectors. The repair procedures are divided into two general
groups: Push-to Seat and Pull-to Seat.
^
Use the Pick(s) or Tools that apply to your terminal.
^
The Terminal Repair Kit (J 38125) contains further information.
Push-to-Seat
Typical Push-to-Seat Connector
Follow the steps below to repair Push-to-Seat connectors. The steps are illustrated with typical connectors. Your connector may differ, but the repair
steps are similar. Some connectors do not require all the steps shown. Skip those that don't apply.
Remove Terminal Position Assurance (TPA) device, Connector Position Assurance (CPA) device and/or secondary lock.
Push-to-Seat Connector
