chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Improper Case Wall Thickness (Fluid Leaks)|Page 6705 > < Recall - Improper Case Wall Thickness (Fluid Leaks)
Page 2
background image

Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these parts will be
obtained as soon as possible, they should be ordered from GMSPO on a "C.I.O." order with no special instruction code, but on an advise code (2).

TRANSMISSION INFORMATION

IMPORTANT:

Transmission cores must be returned to GMSPO as the new transmission is installed. The original transmission assembly must be placed in the
replacement transmission container and returned through the customary GMSPO process.

OTHER PARTS REQUIRED

Quantity

Part Number

Description

Vehicle

12346143

Transmission Fluid

8 Qts

15629093

Transmission Case Adapter Gasket

1

08681168

Transmission Case Adapter Seal

1

IMPORTANT:

SUSPECT TRANSMISSION CASES MUST BE A CASTING DIE #4 AND BE WITHIN THE CASE CAST DATE CLOCK DATES AND
WITHIN THE JULIAN DATE AS OUTLINED. IF THE DIE NUMBER OR DATES NOT WITHIN THE GUIDELINES, THE TRANSMISSION
IS NOT INVOLVED AND NO FURTHER ACTION IS REQUIRED.

Owner Notification & Dealer Campaign Responsibility

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of owner letter included with this bulletin)

DEALER CAMPAIGN RESPONSIBILITY

Dealers will need to inspect all 4L80-E Goodwrench Transmission Assemblies in their parts inventory for suspect 4L80-E transmission assemblies. The
dealer will also need to contact customers who purchased a 4L80-E Goodwrench Transmission Assembly over the counter or dealer traded a unit
between December 15, 1994 and January 20, 1995.

All unsold new vehicles in dealers' possession and subject to this campaign must be held and inspected/repaired per the service procedure of this

Recall - Improper Case Wall Thickness (Fluid Leaks)|Page 6705 > < Recall - Improper Case Wall Thickness (Fluid Leaks)