G 30 Van V8-454 7.4L VIN N TBI (1995)
4.
Rotate the lever assembly on the side of the transmission fully forward into Park position as shown in Figure 5.
5.
Press the lock button to the locked position as shown in Figure 1.
-
Clean the adjuster body as necessary.
6.
Install the clip as shown in Figure 2.
-
There may be adhesive on the adjuster body as shown in Figure 3. If the adhesive interferes with clip installation, remove the adhesive with a
knife or sharp tool.
7.
Lower the vehicle.
8.
With the key in the on position, move the shift lever to engage each transmission detent position (P, R, N, O/D, D, 2, 1) and verify the proper shift
indicator light comes on for each position.
9.
Install the Campaign Identification Label.
Campaign ID Label
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. When installing the new Campaign Identification Label, be sure to install the clear protective covering. Additional
Campaign Identification Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m. to 4:30 p.m. EST).
Ask to Item Number S-1015 when ordering.
Apply "Campaign Identification Label", only on a clean, dry surface.
Claim Information
