G 30 Van V8-454 7.4L VIN N TBI (1995)
CONTROL VALVE ASSEMBLY AND ACCUMULATOR HOUSING
Control Valve Assembly/Accumulator Housing
Torque Sequence And Guide Pin Location
TOOL REQUIRED:
^
Guide Pin J 25025-5
ASSEMBLE
1. Guide pin J 25025-5 into valve body. Located at back bolt hole of detent spring and roller assembly bolt bole.
2. Gasket (45) valve body to spacer plate.
3. Spacer plate (46).
4. Gasket (47) accumulator housing to spacer plate.
5. Accumulator housing assembly (51) onto valve body assembly (44).
