HHR L4-2.0L Turbo (2010)
14. Install the brake pedal pushrod nut (1) and tighten to 10 Nm (89 lb in).
15. Connect the brake pedal position sensor (1) electrical connector.
16. Connect the clutch pedal position sensor (2) electrical connector.
17. Install the steering column. Refer to Steering Column Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Column Replacement).
Warning
Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn
procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the
vehicle is in gear and the starter motor is accidentally engaged.
18. Perform the clutch pedal position sensor learn procedure. Refer to Clutch Pedal Position Sensor Learn (See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Testing and Inspection/Programming and Relearning/MU3 - Manual Transmission) or Clutch Pedal Position Sensor Learn
(See: Transmission and Drivetrain/Manual Transmission/Transaxle/Testing and Inspection/Programming and Relearning/M86 - Manual
Transmission).
