HHR L4-2.0L Turbo (2010)
1. Lubricate a new O-ring with transmission fluid. Refer to Lubrication Specifications (See: Maintenance/Fluids/Fluid - M/T/Specifications/Fluid
Type Specifications).
2. Install the new O-ring.
3. Install the VSS assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the VSS retainer bolt.
Tighten the bolt to 9 Nm (80 lb in).
5. Connect the VSS connector to the VSS (2).
6. Install the left front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).