chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body - TPO Fascia Cleaning Prior to Painting|Page 15445 > < Body - TPO Fascia Cleaning Prior to Painting|Page 15443
Page 3
background image

Prior to installing the shield, inspect the condenser and the radiator for stone impingement.

Dealer technicians are to install a plastic shield that snaps onto the condenser vertical tubes that protects the horizontal radiator and condenser cooling
tubes.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Technical Service Bulletin # 08-06-02-001

Date: 080213

Body - No A/C/Coolant Leak/Engine Overheating

Bulletin No.: 08-06-02-001

Date: February 13, 2008

TECHNICAL

Subject:
No A/C Engine Coolant Leak Engine Overheating (Install Plastic Shield to Stop Stone/Debris Impingement)

Models:
2006-2007 Chevrolet HHR, LS, LT and Panel Van

Built Prior to August 27, 2007

Condition

Some customers may comment on the engine overheating a coolant leak or that the A/C is inoperative.

Cause

This may be due to the very large opening in the front fascia. Stones/debris can impact the A/C condenser and/or the radiator and pierce the horizontal
cooling tubes. This in turn causes loss of A/C refrigerant loss of engine coolant and/or engine overheating.

Correction

Body - TPO Fascia Cleaning Prior to Painting|Page 15445 > < Body - TPO Fascia Cleaning Prior to Painting|Page 15443