HHR L4-2.2L (2007)
6. Position the sunroof drain channel (3) to the sunroof module (4).
7. NOTE: Refer to Fastener Notice.
Install the screws (2).
Tighten the screws to 2 N.m (18 lb in).
8. Position the sunroof window (3) into the opening.
9. Install the sunroof window screws (1).
Tighten the screws to 2 N.m (18 lb in).
10. Finger tighten the screws. Do Not tighten at this time.
11. Cycle the sunroof window to the closed position.
12. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment.
13. Secure the sunroof panel side opening closeout covers (2) into 3 retention clips on the each side of the window.
14. Close the sunshade (1).
