HHR L4-2.2L (2007)
Important:
The EA plastic pieces are marked "LH" (2) for left hand (driver's side) and "RH" for right hand (passenger's side).
5.
Apply hot glue to the energy absorbing (EA) plastic piece pocket areas (1).
Important:
Ensure that the energy absorbing (EA) plastic piece (2) is installed properly. The body of the EA plastic piece should be firmly attached to the
headliner (3).
6.
Insert the energy absorbing (EA) plastic piece to the headliner trim with hot glue.
7.
Tuck headliner in place to ensure proper fit with the A-pillar trim panels and sunshades.
8.
Install the A-pillar trim panels. Refer to Windshield Garnish Molding Replacement in SI.
9.
Install the sunshades. Refer to Sunshade Replacement in SI.
