HHR L4-2.2L (2007)
7. Loosely install the 4 brake booster mounting nuts (3).
8. Apply a thin coating of high temperature grease GM P/N 12345996 (Canadian P/N 10953501) to the pushrod pin on the brake pedal.
9. Connect the brake booster pushrod (4) to the brake pedal pivot pin.
10. Install the bushing (2) and retaining clip (1) to the brake pedal.
Notice: Refer to Fastener Notice.
11. Tighten the vacuum brake booster mounting nuts.
Tighten the nuts to 22 N.m (16 lb ft).
12. Tighten the LH and RH upper brake pedal bracket-to-steering column bolts.
Tighten the nuts to 25 N.m (18 lb ft).
13. Adjust the stop lamp switch.
14. Adjust the cruise control release switch.
15. Install the I/P sound insulator.
