HHR L4-2.2L (2007)
10. Remove the fixture EN 45680-851/cylinder bore sleeve installer EN 45680-853 assembly (1) from the cylinder block (2).
Cylinder Liner Trimming
*
EN 45680-865 Debris Collector (3)
*
EN 45680-861 Trim Tool Assembly (2)
*
Air Control Valve (1)
*
Drill Motor with 1/2 inch chuck,1 1/8 hp, 7 amps, triple gear reduction, and a 450-600 RPM rotational speed in a clockwise direction
*
Trim Tool Preloader (1)
*
EN 45680-862 Set Gage Ring (2)