HHR L4-2.2L (2007)
Engine Mount: Service and Repair
Engine and Transmission Mount Balancing - All Mounts
Engine and Transmission Mount Balancing - All Mounts
Important: Follow the balance procedure steps listed below. Powertrain mounts must be tightened in sequence.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Loosen the front transaxle mount through bolt.
3. Loosen the rear transaxle mount through bolt.
4. Lower the vehicle.
5. Position two floor jacks with wood blocks under the engine and transaxle in order to support the powertrain assembly.