HHR L4-2.2L (2007)
*
The short bolt in the upper rear hole
Notice: Refer to Fastener Notice.
3. Tighten the engine mount bracket bolts.
Tighten the bolts (1, 2, 3) in the sequence shown to 50 N.m (37 lb ft).
4. Install the engine mount.
*
The short bolt in the upper rear hole
Notice: Refer to Fastener Notice.
3. Tighten the engine mount bracket bolts.
Tighten the bolts (1, 2, 3) in the sequence shown to 50 N.m (37 lb ft).
4. Install the engine mount.