HHR L4-2.2L (2007)
6. Place the hook on J 28467-8A (1) through the engine lift bracket on the engine, and set the J 28467-6A (3) onto the J 28467-4A (4)
7. Place the J 36462-A (1) onto the J 28467-4A.
8. Place the J 28467-4A (2) in the corner of the core support.
9. Install the J 28467-1A bracket (3) where the J 36462-A (1) and the J 28467-4A intersect.
10. Hand tighten the J 28467-1A bracket wing nuts.
11. Install the second hook and bracket assembly to the J 36462-A (1) and install the hook to the engine lift bracket.