chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine Controls - MIL ON/Reduced Power Message/DTC P2135|Page 4448 > < Engine/Transmission - Aftermarket Calibrations|Page 4443
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL ON/Reduced Power Message/DTC P2135

TECHNICAL

Bulletin No.: 08-06-04-022B

Date: March 02, 2009

Subject: 
Intermittent Check Engine Light On, Engine Power Reduced Message Displayed in DIC, DTC P2135 Set (Inspect Engine Wiring Harness for Chafing
and Recrimp ECM Terminals, if Necessary)

Models:
2006-2009 Chevrolet HHR 

with 2.2L or 2.4L Engine (VINs B, D, P, V - RPOs LE8, L61, LE5, LE9)

Supercede:

This bulletin is being revised to add the 2009 model year. Please discard Corporate Bulletin Number 08-06-04-022A (Section 06 - Engine/Propulsion
System).

Condition

Some customers may comment that the check engine light is on and an engine reduced power message is displayed in the DIC.

A scan tool may reveal DTC P2135 set as current or in history.

Cause

This condition may be due to poor terminal crimps within the ECM connector, resulting in resistance at the affected circuits.

Correction

Perform the following as necessary.

1. Inspect the engine wiring harness for potential shorts to ground in the following locations and repair and reposition the circuits/harness as necessary:

^

on the ECM/PCM case and/or on the edge of either ECM/PCM connector body

^

at the UBEC bracket

^

at the cylinder head plate (power steering pump blockout)

^

at the EVAP purge valve bracket

^

at the rear of the cylinder head/upper edge of transmission bell housing

Engine Controls - MIL ON/Reduced Power Message/DTC P2135|Page 4448 > < Engine/Transmission - Aftermarket Calibrations|Page 4443