HHR L4-2.2L (2007)
Brake Light Switch: Service and Repair
STOP LAMP SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the sound insulator.
2. Remove the stop lamp switch (1) from the retainer (2). Rotate the switch counterclockwise to release the switch.
3. Remove the switch retainer from the pedal bracket, if necessary.
INSTALLATION PROCEDURE
1. Install the stop lamp switch retainer (2) to the brake pedal bracket with the retainer (1) indexing arrow facing up, if removed previously.
2. Connect the electrical connector to the stop lamp switch.
3. Pull back lightly on the brake pedal to ensure the system is fully released.