HHR L4-2.2L (2007)
Clutch Pedal Position Sensor / Switch: Service and Repair
Clutch Pedal Position Switch Replacement
Removal Procedure
1. Remove the sound insulator.
2. Remove the clutch pedal position switch from the switch retainer. Rotate the switch counterclockwise to release the switch.
3. Disconnect the clutch pedal position switch electrical connector.
4. Remove the switch retainer from the pedal bracket, if necessary.
Installation Procedure
1. Install the switch retainer to the pedal bracket with the retainer indexing arrow facing the instrument panel, if removed previously.
2. Connect the clutch pedal position switch electrical connector.
3. Pull back lightly on the clutch pedal to ensure the system is fully released.