HHR L4-2.2L (2007)
Important: Inspect the steering gear and the rack and pinion inner tie rod for any debris. The parts must be clean and free of debris
before installing the steering gear boot.
2. Apply grease from the steering gear boot service kit to the indicated locations.
Important: The steering gear boot must seat in the groove on the steering gear.
3. Install the steering gear boot to the steering gear.
4. Use pliers J 22610 to crimp the inner steering gear boot clamp.
5. Install the outer steering gear boot clamp.
6. Install a new rack and pinion inner tie rod nut.
7. Install the rack and pinion outer tie rod end.
8. Adjust the front toe.
