HHR L4-2.2L (2007)
![background image](/chevrolet/hhr/l4-2.2l/Page-1182084.png)
REPAIRING DAMAGED WIRE INSULATION
Wire Size Conversion
If the conductive portion of the wire is not damaged, locate the problem and apply tape around the wire. If the damage is more extensive, replace the
faulty segment of the wire.
SIR/SRS Wiring Repairs
SIR/SRS WIRING REPAIRS
TOOLS REQUIRED
J-38125 Terminal Repair Kit
The Supplemental Inflatable Restraint (SIR) System/Supplemental Restraint System (SRS) requires special wiring repair procedures due to the
sensitive nature of the circuitry. Follow the specific procedures and instructions when working with the SIR/SRS, and the wiring components, such as
connectors and terminals.
IMPORTANT: Do not use the terminals in the kit in order to replace damaged SIR/SRS system terminals. Use either an SIR/SRS pigtail or a
terminated lead from the SIR Repair Kit Tray.
The tool kit J-38125 contains the following items:
-
DuraSeal splice sleeves, in order to repair the SIR/SRS wiring
-
A special crimping tool
-
A heat torch
-
An instruction data
The DuraSeal splice sleeves have the following 2 critical features:
-
A special heat shrink sleeve environmentally seals the splice.
The heat shrink sleeve contains a sealing adhesive inside.
-
A cross hatched (knurled) core crimp provides the necessary low resistance contact integrity for these sensitive, low energy circuits.
The J-38125 also serves as a generic terminal repair kit. The kit contains the following items:
-
A large sampling of common electrical terminals
-
The correct tools in order to attach the terminals to the wires
-
The correct tools in order to remove the terminals from the connectors
SIR/SRS CONNECTOR REPAIR (PLASTIC BODY AND TERMINAL METAL PIN)
The terminals in the SIR/SRS system are made with a special plating. This plating provides the necessary contact integrity for the sensitive, low
energy circuits. Use the J-38125 SIR/SRS Terminal Repair Kit for repairing SIR/SRS terminals and connectors. Do not substitute any other terminals
for those in the repair kit.
The J-38125 SIR/SRS Terminal Repair Kit contains:
-
Various terminated leads for sensing and diagnostic module (SDM) terminal replacement