HHR L4-2.2L (2007)
Notice: Refer to Fastener Notice.
3. Hand start the bolts that attach the oil feed pipe assembly to the transmission.
Tighten the bolts to 14 N.m (124 lb in).
4. Install the transmission oil filter assembly.
5. Install the transmission oil pan and gasket.
6. Lower the vehicle.
7. Refill the transmission to the proper level.
8. Inspect the transmission oil level.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
9. Reset the TAP values. Refer to Transmission Adaptive Functions.
