HHR L4-2.2L (2007)
Wiper Switch: Service and Repair
Windshield Wiper and Washer Switch Replacement
WINDSHIELD WIPER AND WASHER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the steering column trim covers.
2. Disconnect the windshield wiper/windshield washer switch connector.
3. Depress the locking tabs and remove the windshield wiper/windshield washer switch.
INSTALLATION PROCEDURE
1. Install the windshield wiper/windshield washer switch to the steering column.Ensure the locking tabs are fully engaged.
2. Connect the windshield wiper/windshield washer switch harness connector.
3. Install the steering column trim covers.
