HHR L4-2.4L (2010)
5. Install the inboard brake pad (1).
Note the location of the brake pad wear sensor.
6. Install the outboard brake pad (2).
7. Remove the support and position the brake caliper to the caliper bracket.
8. Install the brake caliper guide pin bolts (1) and tighten to 35 Nm (26 lb ft).
9. Remove the wheel nuts retaining the brake rotor to the hub.
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
11. Lower the vehicle.
Rear Brake Caliper Bracket Replacement
Rear Brake Caliper Bracket Replacement
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Removal Procedure
