HHR L4-2.4L (2010)
Parking Brake Cable: Service and Repair
Parking Brake Rear Cable Replacement (Disc)
Parking Brake Rear Cable Replacement (Disc)
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Note: The park brake cable adjusting nut is a nylon lock type. Use ONLY HAND TOOLS when loosening or tightening the adjusting nut.
1. Remove the console rear trim plate. Refer to Console Rear Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Console Rear Trim Plate Replacement).
2. Ensure that the park brake lever is in the fully released position.
3. With the park brake lever in the released position, loosen the adjusting nut (1) enough to completely relieve tension on the front cable.
