HHR L4-2.4L (2010)
1. Install new piston oil nozzles. Turn the extension by hand to ensure that the threads are aligned. Use a long screwdriver to ensure that the nozzle
does not rotate and make sure that the locating pin is properly indexed in its hole. Tighten the piston oil nozzle bolts to 15 Nm (11 lb ft).
2. Install the engine oil pan. Refer to Oil Pan Replacement (See: Oil Pan/Service and Repair).
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Replace the oil filter and fill the engine with new engine oil. Refer to Engine Mechanical Specifications (LAP, LE8) (See: Specifications/Service
Limits & General Specifications)Engine Mechanical Specifications (LAT, LE5, LE9) (See: Specifications/Service Limits & General
Specifications).
5. Reset the engine oil life monitor. Refer to GM Oil Life System Resetting (See: Instrument Panel, Gauges and Warning Indicators/Oil Change
Reminder Lamp/Service and Repair).