HHR L4-2.4L (2010)
13. Remove the water pump (1).
Installation Procedure
1. Apply sealant to the water pump drain plug. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) or Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the water pump drain plug and tighten to 22 Nm (16 lb ft).