HHR L4-2.4L (2010)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the instrument panel cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Cluster Trim Plate Bezel Replacement).
2. Remove the lower steering column trim cover bolts and remove the upper steering column trim cover. Refer to Steering Column Trim Cover
Replacement (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Trim Cover Replacement).
3. Disconnect the turn signal multifunction switch electrical connectors.
4. Position the left lower steering column trim cover out of the way,
5. Depress the switch locking tabs and remove the turn signal multifunction switch (1).
Installation Procedure