HHR L4-2.4L (2010)
Fuse Block: Service and Repair
Underhood Electrical Center or Junction Block Bracket Replacement
Underhood Electrical Center or Junction Block Bracket Replacement
Removal Procedure
1. Remove the electrical center cover (1).
2. Disconnect the positive battery cable from junction box. Refer to Battery Positive Cable Replacement (See: Starting and
Charging/Battery/Battery Cable/Positive/Service and Repair/Battery Positive Cable Replacement).
3. Remove the fasteners (1) securing the electrical center board (2).
4. Unlock the tabs on the electrical center board.
5. Lift up on the electrical center board.