HHR L4-2.4L (2010)
5. Insert the J 38125-557 into the 2 cavities on each side of the terminal at the front of the connector and push until you feel the tool disengage the
terminal retainers. See the release tool cross reference in the Reference Guide of the J-38125 to ensure that the correct release tool is used.
6. Carefully pull the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the terminal is
difficult to remove, repeat the entire procedure.
Terminal Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 .
Connector Position Assurance Locks
Connector Position Assurance Locks
The connector position assurance (CPA) is a small plastic insert that fits through the locking tabs of the connector. CPAs are used in various connectors
throughout the vehicle. CPAs are also used in all SIR system electrical connectors. The CPA ensures that the connector halves cannot vibrate apart. You
must have the CPA in place in order to ensure good contact between the mating terminals, of the connector.
Connector Repairs
Connector Repairs
Connector Repairs contains a list of all connector repairs. The connector repairs are listed by the connector manufacturer and then by connector type. If
the technician cannot identify the manufacturer of the connector, refer to Identifying Connectors below. Knowing the connector manufacturer will assist
in finding the correct connector repair from the following list:
*
Connector Position Assurance Locks (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector
Position Assurance Locks)
*
Terminal Position Assurance Locks (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Terminal
Position Assurance Locks)
*
Bosch Connectors (BSK) (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Bosch Connectors (BSK)
)Bosch Connectors (0.64) (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Bosch Connectors (0.64)
)Bosch Connectors (2.8 JPT) (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Bosch Connectors (2.8
JPT))Bosch Connectors (ECM) (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Bosch Connectors
(ECM))
*
Delphi Connectors (Weather Pack) (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Delphi
Connectors (Weather Pack))Delphi Connectors (Push To Seat) (See: Testing and Inspection/Component Tests and General
Diagnostics/Connector Repairs/Delphi Connectors (Push To Seat))Delphi Connectors (Pull To Seat) (See: Testing and Inspection/Component
Tests and General Diagnostics/Connector Repairs/Delphi Connectors (Pull To Seat))Delphi Connectors (Micro-Pack 100W) (See: Testing and
Inspection/Component Tests and General Diagnostics/Connector Repairs/Delphi Connectors (Micro-Pack 100W))Delphi Connectors (Micro.64)
(See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Delphi Connectors (Micro .64))Delphi Connectors
