HHR L4-2.4L (2010)
Accelerator Pedal: Service and Repair
Accelerator Pedal Replacement
Accelerator Pedal with Position Sensor Assembly Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Knee Bolster Replacement).
2. Remove the insulator panel. Instrument Panel Insulator Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Insulator Replacement).
3. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).
4. Remove the APP sensor nuts.
5. Remove the APP sensor.
