HHR L4-2.4L (2010)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
Warning
Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
*
Use forced air ventilation such as a fan set outside of the trunk.
*
Plug or cap any fuel system openings in order to reduce fuel vapor formation.
*
Clean up any spilled fuel immediately.
*
Avoid sparks and any source of ignition.
*
Use signs to alert others in the work area that fuel system work is in process.
1. Remove the fuel pump module. Refer to Fuel Pump Module Replacement (See: Fuel Delivery and Air Induction/Fuel Pump/Service and Repair).
2. Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.
