HHR L4-2.4L (2010)
Parking Brake Warning Switch: Service and Repair
Parking Brake Indicator Switch Replacement
Removal Procedure
1. Remove the console rear trim plate. Refer to Console Rear Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Console Rear Trim Plate Replacement).
2. Disconnect the park brake indicator switch electrical connector (1).
3. Remove the park brake indicator switch mounting screw (2).
4. Remove the park brake indicator switch from the park brake lever assembly.
Installation Procedure
1. Align the park brake park brake indicator switch locating tab to the locating hole on the park brake lever assembly.
2. Install the park brake indicator switch to the park brake lever.
