HHR L4-2.4L (2010)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder Control Solenoid Replacement
Ignition Lock Cylinder Control Solenoid Replacement
Removal Procedure
1. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
2. Disconnect the ignition lock cylinder solenoid harness connector.
3. Remove the ignition lock cylinder solenoid screws.
Note: Do not attempt to remove any roll pins retaining the plunger mechanism. The ignition lock cylinder solenoid replacement part consists of